SMC大流量型油霧器,進口SMC油霧器
如果您對該產品感興趣的話,可以
產品名稱: SMC大流量型油霧器,進口SMC油霧器
產品型號: AL50-06
產品展商: SMC
產品文檔: 無相關文檔
簡單介紹
SMC大流量型油霧器,進口SMC油霧器
The oil that has been pumped from the tank
passes through felt q where it is filtered,
and is fed into the case through nozzle w.
SMC大流量型油霧器,進口SMC油霧器
的詳細介紹
SMC大流量型油霧器,進口SMC油霧器
500 (Capacity between levels 440)
Turbine oil Class 1(With no additives), ISO VG32
–5 to 60°C (No freezing)
Max. operating pressure
Min. operating flow (l/min (ANR))
Bowl capacity (cm3)The problem of running out of oil is
prevented because the oil is fed
automatically.When the volume of oil reaches a certain
level, float e ascends, valve t descends via
lever r, nozzle w closes, and the feeding of
oil stops, thus completing the oil feeding
This system makes lubrication work
unnecessary, thus significantly
reducing the amount of maintenancelabo
Recommended lubricant
Ambient and fluid temperature
Accessory (Standard)
Note) • Conditions: Inlet pressure =
0.5 MPa, Number of drop = 5 drops/min, Turbine oil
Class 1 (with no additives) ISO VG32,
Temperature = 20°C, Needle fully open
• Use consumption air flow for operating minimum flow.
This is an assembly of a case, a case guard and a clamp ring.
( ): Part number for the case only
-3 indicates an assembly of a case and a drain cock.
process. When the oil inside the case is
