YUKEN日本進口單向減壓閥詳細描述
如果您對該產品感興趣的話,可以
產品名稱: YUKEN日本進口單向減壓閥詳細描述
產品型號: SB1099-06-140-3-4-5005??
產品展商: YUKEN
產品文檔: 無相關文檔
簡單介紹
YUKEN日本進口單向減壓閥詳細描述
ydraulic circuit below that of the main circuit. In addition, operation under remote
control is possible by using the remote control port.
Pressure Reducing and Check Valves Pressure reducing and check valves are used to
set the pressure of a hydraulic circuit below that of the main circuit.
They have check valves, which allow a free flow from the seconda
YUKEN日本進口單向減
YUKEN日本進口單向減壓閥詳細描述
的詳細介紹
YUKEN日本進口單向減壓閥詳細描述
上海乾拓貿易有限公司
聯系人：
企業QQ：
手 機：（微信）
電 話：
郵箱；@163.com
地址：
should be kept at a low back p ressure close to the atmospheric pressure.
control is possible by using the remote control port.
Pressure Reducing and Check Valves Pressure reducing and check valves are used to set
the pressure of a hydraulic circuit below that of the main circuit.
oadjust the pressure, loosen the lock nut and turn the pressure adjustment
handle slowly clockwise for higher pressures and anti-clockwise for lower pressures.
After adjustments, do not forget to tighten the lock nut.
Connect the drain port directly to the tank in which case the pressure at the drain port
ydraulic circuit below that of the main circuit. In addition, operation under remote
control is possible by using the remote control port.
Pressure Reducing and Check Valves Pressure reducing and check valves are used to
set the pressure of a hydraulic circuit below that of the main circuit.
They have check valves, which allow a free flow from the secondary side to the primary.
They have check valves, which allow a free flow from the secondary side to the primary.
Operation under remote control is also possible by using t he remote control port.
Recommended Viscosity and Oil Temperatures 2 Viscosity ranging between 15 - 400 mm /s (77 - 1800 SSU).
Oil temperatures between -15/+70°C (5 - 158°F). Use hydraulic fluids which satisfy
the recommended viscosity and oil temperatures given above.
Control of Contamination Due caution must be paid to maintaining control over contamination of the hydraulic
There are two threaded connection type primary pressure ports.
They can be connected each other in-line; one as an inlet and the other as an outlet
or the valve can be used by plugging one of the pressure ports.
Pressure Reducing Valves Pressure reducing valves are used to set the pressure of ah
fluids which may otherwise lead to breakdowns and shorten the life of the valves.
Please maintain the degree of contamination within NAS 1638Grade 12. Use 25 μm or finer line filter.
Up to 21 MPa (3050 PSI), 500 L/min (132 U.S.GPM)
Operation under remote control is also possible by using t he remote control port.
Petroleum base oils Synthetic fluids Water containing fluids
Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
When phosphate ester fluid is used, prefix "F-" t o the model number because the special
seals (fluororubber) are required to be used. Use water-glycol fluid.
Threaded Connections / Sub-plate Mounting -03/06/10 (3/8, 3/4, 1-1/4)RT/RG
Pressure Reducing Valves Pressure reducing valves are used to set the pressure of ah ydraulic
circuit below that of the main circuit. In addition, operation under remote
YUKEN日本進口單向減壓閥詳細描述
