**日本油研壓力控制閥，MPA-01-2-40??

**日本油研壓力控制閥，MPA-01-2-40  
上海乾拓貿(mào)易有限公司
聯(lián)系人：
企業(yè)QQ：
手 機(jī)：（微信）
電 話：
郵箱；@163.com
地址：
all of which are operated by a pressure rise in the circuit, sensed either internally or remotely. 
HC Type Pressure Control Valves These valves are hydraulically damped,
by a pressure rise in the circuit, sensed either internally or remotely. 
H Type Pressure Control Valves These valves are hydraulically damped, direct operated,
pressure control valves which can be actuated by internal or external pilot pressure.
 There are various types of valve including sequence, unloading and low pressure relief valves,
HC Type Pressure Control Valves These valves are hydraulically damped,
Oil temperatures between -15/+70°C (5 - 158°F).
 Use hydraulic fluids which satisfy the recommended viscosity and oil temperatures given above.
Due caution must be paid to maintaining control over contamination of the hydraulic
direct operated pressure control valves which can be actuated by internal
when free reverse flow f rom secondary port to the primary port is desired. 
There are various types of valve including sequence and c ounterbalance valves,
 all of which are operated by a pressure rise in the circuit, sensed either internally or remotely.
Fluid Types Hydraulic Fluids Any type of hydraulic fluids listed in the table below can be used.
Note: For use with hydraulic fluids other than those listed above,
all of which are operated by a pressure rise in the circuit, sensed either internally or remotely.
2  Viscosity ranging between 15 - 400 mm /s (77 - 1800 SSU).
or external pilot pressure.  They are available with integral check valves for use
direct operated pressure control valves which can be actuated by internal or external pilot pressure. 
They are available with integral check valves for use when free reverse
direct operated, pressure control valves which can be actuated by internal
or external pilot pressure.  There are various types of valve including sequence,
 unloading and low pressure relief valves, all of which are operated
flow f rom secondary port to the primary port is desired.
 There are various types of valve including sequence and c ounterbalance valves,
please consult your Yuken representatives in advance. Water containing fluids
Use phosphate ester or polyol ester fluid.  When phosphate ester fluid is used,
 prefix "F-" to the model number because the special seals  (fluororubber)
are required to be used. Use fluids equivalent to ISO VG32 or VG46. 
fluids which may otherwise lead to breakdowns and shorten the life of the valves. 
Please maintain the degree of contamination within NAS 1638-Grade 1 2.  Use 25 μm or finer line filter.
H Type Pressure Control Valves These valves are hydraulically damped,
 HCT/HCG-03/06/10(3/8,3/4,1-1/4) Threaded Connections/Sub-plate Mounting Up to 21 MPa (3050 PSI), 500 L/min (132 U.S. GPM)

**日本油研壓力控制閥，MPA-01-2-40