供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
如果您對該產品感興趣的話,可以
產品名稱: 供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
產品型號:
產品展商: HYDAC
產品文檔: 無相關文檔
簡單介紹
供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
Filtration: Class 20/18/15 according to
ISO 4406
Installation: no orientation restriction
Hole pattern: ISO 6264-08
Weight: 4,3 kg
供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
的詳細介紹
供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
Operating pressure: max. 350 bar
Flow rate: max. 400 l/min
Operating fluid: hydraulic oil to DIN 51524 part 1 and 2
Operating fluid temperature range: -20°C up to max. +80°C
Ambient temperature range: -20°C up to max. +50°C
Viscosity range: 7,4 – 400 mm2/s is recommended
HYDAC pilot operated pressure relief valves in poppet version are spring-loaded poppet valves which limit the pressure in hydraulic systems in the elevated performance range. Different pressure ranges enable an optimal system adjustmen
The pilot operated pressure relief valve VP-DBP10 is a leakage-free poppet valve - subplate mounted - used for limiting the inlet pressure by opening the outlet against spring force. Qmax = 200 l/min Pmax = 350 bar
The pilot-operated pressure relief valve VP-DBP10 in subplate design has a pilot
and a main stage – both are poppet-type.
Its function is to limit the pressure in the system. When the hydaulic force at port P
exceeds the pre-set spring tension of the pilot stage, the poppet opens and oil flows
from the rear side to the tank port. Due to the resulting pressure imbalance, the main
piston moves against the return spring and lets oil from port P to T.
This continues until the system pressure is equal to the spring pressure and the
valve closes again.
Attention: pressures at port T are increasing the opening pressure!
供應賀德克直動式溢流閥,HYDAC直動式溢流閥材質說明
