**康茂盛拉桿型氣缸,供應camozzi拉桿型氣缸電氣特性

**康茂盛拉桿型氣缸,供應camozzi拉桿型氣缸電氣特性
氣缸是一種雙活塞的氣動滑座。氣缸與導向裝置設計在一起
結構形式 緊湊型，磁傳，QXT 采用青銅粉末冶金導向套，QXB 采用滾珠直線導軌導向套
The moving parts can withstand large radial loads and moments.
Dual piston rod design can increase the output of the cylinder twice,
Very suitable for installation in a small space, and the need for greater output force, the load to be guided workplace.
The guide sleeve of the cylinder has two forms: bronze powder metallurgy guide sleeve (QXT) and ball linear guide guide (QXB).
When the radial load is large, the general use of QXT type;
and when the movement accuracy is high, and the use of frequency is recommended when the use of QXB type.
行程 10 ÷ 100 mm
The cylinder is a double piston pneumatic slide. The cylinder is designed with the guide
Compact form, magnetic transmission, QXT bronze powder metallurgy guide sleeve, QXB ball linear guide guide sleeve
Working mode double effect
Material Anodized Aluminum Alloy Base and Fixing Plate, Polyurethane Seal,
Roll AISI 303 Stainless Steel Piston Rod (QXT) or C50 Hardened Steel Piston Rod (QXB)
工作壓力 1 ÷ 10 bar
介質 潔凈空氣，不需潤滑。如使用了油霧潤滑，應不間斷的使用油霧潤滑（建議使用 ISO VG32 潤滑油），
移動部件可承受較大的徑向負載和力矩。雙活塞桿的設計可使氣缸的輸出力提*一倍，
很適合安裝在較小的空間，且需要較大輸出力、負載需被導向的工作場合。
氣缸的導向套有兩種形式：青銅粉末冶金導向套（QXT）和滾珠直線導軌導向套（QXB）。
當徑向負載較大時，一般采用 QXT 型；而當運動精度較*，且使用頻率較大時建議采用 QXB 型。
The mounting method utilizes the threaded holes on the base
Stroke 10 ÷ 100 mm
Operating temperature 0 ÷ 80 ° C (dry air at -20 ° C)
Speed 50 ÷ 500 mm / s (no load)
Working pressure 1 ÷ 10 bar
Medium clean air without lubrication. Such as the use of oil mist lubrication,
should be used without interruption of oil mist lubrication (recommended the use of ISO VG32 lubricants),

**康茂盛拉桿型氣缸,供應camozzi拉桿型氣缸電氣特性